MotionCam-3D Color

Real-time colorful point clouds

抗振动和环境光

不会产生失真或损坏的采集

没有模糊的边缘

对于移动速度不超过40米/秒的物体

MotionCam3D

Low noise and accuracy

动态场景的三维扫描

工业用设备

具有IP65、PoE和热校准功能

计算能力强

每秒钟提供1500万个3D点

无与伦比的扫描范围

from 36 cm up to 4 m

3D scanning of transparent,
translucent and shiny objects

Enabling new automation in logistics, automotive and pharma

Clear & complete scans

New 3D scanning method allows significantly improved signal-readout from transparent, translucent, and glossy objects to provide much more completeness and quality of 3D scans even without the need of using coating and scanning sprays. Allowing to automate previously challenging use cases in logistics, automotive and pharma industries. Thanks to COMPIS this can happen at a fast cycle so it is ready for deployment.

Super-fast 3D scanning with doubled resolution

Enabling 2x resolution, 5x faster scanning, 10x more applications

2 Mpix resolution in motion

MotionCam-3D now allows you to scan scenes in motion at 2 Mpix resolution. This brings significant improvement to many industrial applications, from inspection and quality control to vision-guided robotics. The 2 Mpix resolution enables faster bin pickings with lower cycle times, less errors, and faster error recovery. Effective resistance to vibrations and non-linear movement allows you to pick object from conveyors or inspect them in motion. Hand-eye setups are now possible to do with minimum stopping and no slow-downs during scan acquisition.

Now even easier sensor integration with new GigE Vision support

Gige Vision

Available Data Outputs

3D Point cloud example

3D Point cloud example

Normals (nX nY nZ)
Depth Map (Z)
Grayscale Texture
Color Texture (RGB)

Easy setup

平行结构光的力量

平行结构光将结构光扫描的最先进质量和分辨率带入高动态场景的三维重建中。这种新颖的专利技术采用了一种巧妙的传感器设计,与标准图像传感器的连续扫描不同,这种传感器可以在一次快照中进行采集。这意味着,平行结构光方法实际上是将3D场景冻结在时间上。

Real Scene

Real Scene

Speed
Quality

Parallel Structured Light

Structured Light

ToF / Active Stereo

Case studies

Dimensioning & measurement

The logistics industry needs to keep up with the growing demand of the market. Continuous growth in orders requires modern automation solution that require high accuracy scanning of variety of objects that are dynamic. Implementing conventional vision system may prove difficult, however with the unique abilities of MotionCam-3D it is no longer problem to receive accurate measurements or even objects that are in motion. Read more...

Overhead conveyors

Items on overhead conveyors have unpredictable non-linear movement. They are often swinging and vibrating. This is where MotionCam-3D offers unique value proposition - capturing of highly precise point clouds of even these objects that are moving unpredictably. Read more...

Hand Eye object manipulation

Various industries are demanding a versatile and faster material handling system that does not have to stop. For MotionCam-3D the scanning in motion is no longer a problem. When mounted on robot it offers multi-perspective scanning, without motion blur, thus offering a crystal clear point clouds for further robot navigation 阅读更多

Scanning of large objects

In industry we are often encountering over-sized objects that are very challenging for scanning. Thanks to the large scanning volume of our MotionCam-3D and ability to create a “mesh” of point clouds it is possible to create precise and accurate images of even these oversized objects.

Picking of moving objects

The amount of packages handled is constantly increasing and it is impossible to keep up with the pace whilst satisfying the throughput demands. With MotionCam-3D there is no need to stop the conveyor belt to perform actions. It offers versatility, speed and quality without compromises.

3D model creation of large objects

Accurate manipulation of large object within acceptable cycle time is something we often observe in applications as sandblasting, painting or even welding. In order to automate these processes it is necessary to create accurate models which serve as a basis for these activities. MotionCam-3D offers a lot of flexibility and mobility due to its ability to provide continuous stream of high quality data that can be instantly meshed into a accurate 3D model.

Assembly in motion

Accurate robot navigation for synchronized movement of robot and object on a production line belongs to one of the most complicated automation challenges in any industry. Through utilization of MotionCam-3D and continuous stream of data we are able to establish real time object position tracking and navigation of manipulators.

Moving objects inspection

Inspection of stamped/molded pieces is done with a predefined interval to reduce lost time in stopping the conveyor and production process. This approach is time demanding and done now for only every 50th/100th piece thus increasing costs in case of defect. With MotionCam-3D you can ensure continuous quality check & fast identification of errors and take immediate corrective actions.

任何条件下的稳健三维重建

对不可预知的运动进行高度的细节处理。

The logistics industry needs to keep up with the growing demand of the market. Continuous growth in orders requires modern automation solution that require high accuracy scanning of variety of objects that are dynamic. Implementing conventional vision system may prove difficult, however with the unique abilities of MotionCam-3D it is no longer problem to receive accurate measurements or even objects that are in motion. Read more...

高速场景识别

捕捉并重建混乱和不可预测的运动,将其转化为高精度的点云,以便进一步处理。

有光泽的、粗糙的或无光泽的物品。

重建纹理、哑光、光泽甚至变形物体的精确点云。

有机材料及其质地

生成各种运动中的食物的高质量图像。无需担心颜色、形状或结构--始终得到最精确的点云。

种类繁多的包装

无论您是想识别小盒子还是大包裹,都有适合您的型号。享受即时的效果,没有运动模糊。

从小到大的表面

即使在边缘和较薄的物体上也能享受高水平的细节。现在,您不必再担心因振动或环境光造成的不准确。

规格表

*给定的计量单位是毫米
扫描范围
摄像机模式
点尺寸
准确度
随机噪声
看更多 看更多 看更多 看更多 看更多 看更多

软件下载

Download software for MotionCam 3D, MotionCam 3D Color, integrations, object localization and calibration utilities.

Downloads

文档

Technical documentation, user manuals for Photoneo products.

文档